Mirco-glass beads are a new type of material with a wide range of uses and special properties developed in recent years. The product is made of borosilicate raw materials through high-tech processing. The particle size is 10-250 microns, and the wall thickness is 1-2 microns. The product has the advantages of light weight, low thermal conductivity, high strength, good chemical stability, etc. Its surface has been specially treated to have lipophilic and hydrophobic properties, and it is very easy to disperse in organic material systems.
Glass beads are made by firing glass sand. According to the size, glass beads can be divided into glass beads (glass beads are a kind of glass beads and refer to solid spheres with a particle size of less than 1 mm) and glass beads. According to the use, it can be divided into reflective glass beads, sandblasting glass beads, grinding glass beads, and filling glass beads. Among them, reflective glass beads can be divided into safety protection reflective glass beads and screen glass beads ; According to the refractive index, it can be divided into general refractive index and high refractive index glass beads.
The color non-slip pavement adhesive has good anti-corrosion function and can withstand the corrosion of acid, alkali, salt and automobile exhaust for a long time, so it can protect the roadbed from damage and achieve sufficient strength. We know that the cost of building roads is actually very high.
Colored non-slip surfacing can make the environment beautiful, also can promote traffic safety, which is used more and more popular.construction in some relatively wet road sections, the previous method cannot be used for construction, and the impact of adverse water temperature conditions needs to be considered during the period.
Look at impurities: As colored glass beads are a secondary molding production process, most glass bead factories use flame floatation to produce glass beads. The raw material is recycled glass. Impurities will be involved in the production process and in the raw materials. This impurity is manifested in black spots in the product, which cannot be avoided.
1. The chemical composition is inert silica, and there is no concern about chemical activity interference;
2. Round elastic particles. Impact resistant, can be used repeatedly
3 The surface of the ball will not damage the machined surface and precise dimensions;
